Update instruction

• Connect Audio interface MIDI output to Plasma Voice midi input using DIN-5 to 3.5mm TRS adapter cable.
• Power off the Plasma Voice
• Press and hold all three buttons (Clutch+Trig+Alt). While holding the buttons, power on the device
• If the upper LED bar shows rolling animation, that means that the device has entered the firmware update mode.
• Now (in the Firmware update screen above) you can select the Audio interface you connected to Pasma Voice as well as the Firmware you wish to upload.
• Press the Update Plasma Voice button and dont close the tab while firmware update is in progress.
• When the update finishes the Plasma Voice should start working normaly. If that dosent happen you should repeat the process.