PREPARE

• First, prepare a suitable 9V DC center-negative power supply with at least 500 mA or higher. Daisy-chain power solutions are not recommended.
• Then, close any applications that may be using MIDI, such as DAWs or other MIDI controllers.
• Please ensure you are using the latest web browser version of either Google Chrome or Microsoft Edge.
• And have a USB-C cable ready to connect your Recoder to your computer.

CONNECT

• Power on your Recoder using a 9V DC center-negative power supply and connect it to your computer using USB-C cable.
• Your computer’s operating system may (and may not, no worries about that) notify you that a new MIDI device - your Recoder - has been connected.
• And depending on your browser, check if any pop-ups are asking you to enable the MIDI sysex messages.
• Then, click the Connect button to bring the pedal into firmware update mode.
• Now you can choose the latest firmware and click the Update Recoder button to start the upate procedure.