Firmware Update

Update instruction

  • Connect Audio interface MIDI output to Plasma Voice midi input using DIN-5 to 3.5mm TRS adapter cable.
  • Power off the Plasma Voice
  • Press and hold all three buttons (Clutch+Trig+Alt). While holding the buttons, power on the device
  • If the upper LED bar shows rolling animation, that means that the device has entered the firmware update mode.
  • Now (in the Firmware update screen above) you can select the Audio interface you connected to Pasma Voice as well as the Firmware you wish to upload.
  • Press the Update Plasma Voice button and dont close the tab while firmware update is in progress.
  • When the update finishes the Plasma Voice should start working normaly. If that dosent happen you should repeat the process.