ROUTE SETTINGS
The MOTOR Synth offers various routing options (see SIGNAL PATH).
-
INPUT ROUTE - (MSTR / V1 / V2 / V1+V2) selects whether the INPUT signal is routed to the MASTER Output or mixed to MOTOR VOICE1 and/or VOICE2 before the Analog Filter stages.
-
CLEAN VOL - volume of INPUT SIGNAL
-
DCO ROUTE - (MSTR / V1 / V2 / V1+V2) selects whether the DCO voice is routed to the MASTER Output (post Digital Filter) or mixed to the MOTOR VOICE1 and/or VOICE2 before the Analog Filter stages.
-
MSTR ROUTE (MASTER ROUTE) - the MOTOR Synth's single OUTPUT is a TRS 1/4' Jack OUTPUT.
-
MIX L - output signals of both MOTOR Voices (Post Filters) are mixed to LEFT output channel (TIP)
-
SPLIT - output of VOICE 1 is routed to the Left output channel (TIP) and VOICE 2 is routed to Right output channel (RING)
-
MOTOR VOL - allows to change maximum volume of motor VCAs before the built-in Tone circuit (see SIGNAL path)
