MIDI BASIC INFORMATION
Basic information
|
|
Transmit/
Export
|
Recognize/
Import
|
Remarks
|
|
1. BASIC INFORMATION
|
|
|
|
|
MIDI channels
|
1 – 16
|
1 – 16
|
Available settings from MIDI IN/OUT:
BASE CHANNEL - Receive/Transmit CC/PC/NRPN channel
V1 CH, V2 CH, DCO CH - Receive/Transmit midi notes per voice
MIDI message filters input: NOTES, RT(Clock), CC/PC, NRPN
MIDI message filters output: NOTES, RT(Clock), START/STOP, CC/PC, NRPN
|
|
Note numbers
|
0 – 127
|
0 – 127
|
As Motor Synth’s input system supports microtonality, it sends closest frequency note on/off messages
|
|
Program change
|
No
|
Yes
|
Selects and loads preset from SD card in current bank if exists.
|
|
Bank Select response?
|
No
|
Yes
|
Selects current bank if exists in SD card
|
|
Mode 1: Omni-On, Poly
Mode 2: Omni-On, Mono
Mode 3: Omni-Off, Poly
Mode 4: Omni-Off, Mono
Multi Mode
|
No
No
No
No
No
|
Yes
Yes
Yes
Yes
No
|
Accepts all midi channels, POLY set to maximum (4OSC) for all voices, all sound off event
Accepts all midi channels, POLY set to minimum (UNI) for all voices, all sound off event
Accepts set midi channels, POLY set to max (4OSC) for all voices, all sound off event
Accepts set midi channels, POLY set to minimum (UNI) for all voices, all sound off event
|
|
Note-On Velocity
|
No
|
Yes
|
Assignable with depth coefficient for all envelopes separately (AMP, FILTER, MOD)
|
|
Note-Off Velocity
|
No
|
No
|
|
|
Channel Aftertouch (Yes/No)
|
No
|
Yes
|
Assignable to 3 parameters simultaneously (MIDI ASSIGN)
|
|
Poly (Key) Aftertouch (Yes/No)
|
No
|
No
|
|
|
Pitch Bend (Yes/No)
|
No
|
Yes
|
Accepts pitch bend in channels set in voice midi channel settings (MIDI IN/OUT)
|
|
Active Sensing (Yes/No)
|
No
|
No
|
|
|
System Reset (Yes/No)
|
No
|
No
|
|
|
Tune Request (Yes/No)
|
No
|
No
|
|
|
Universal System Exclusive:
Sample Dump Standard
Device Inquiry
File Dump
MIDI Tuning
Master Volume
Master Balance
Notation Information
Turn GM1 System On
Turn GM2 System On
Turn GM System Off
DLS-1
File Reference
Controller Destination
Key-based Instrument Ctrl
Master Fine/Coarse Tune
Other Universal System Exclusive
|
|
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
|
|
|
Manufacturer or Non-Commercial System Exclusive
|
Yes
|
Yes
|
0x00 0x21 0x6D
|
|
NRPNs (Yes/No)
|
Yes
|
Yes
|
Motor synth accepts all parameter change including sound and global parameters thru NRPN (see NRPN table)
|
|
RPN 00 (Pitch Bend Sensitivity)
RPN 01 (Channel Fine Tune)
RPN 02 (Channel Coarse Tune)
RPN 03 (Tuning Program Select)
RPN 04 (Tuning Bank Select)
RPN 05 (Modulation Depth Range)
|
No
No
No
No
No
No
|
No
No
No
No
No
No
|
|
|
|
|
|
|
|
2. MIDI Timing and Synchronization
|
|
|
|
|
MIDI Clock (Yes/No)
|
Yes
|
Yes
|
Synced SEQUENCER, ARP, MOTION REC, MODULATION options
|
|
Song Position Pointer (Yes/No)
|
No
|
No
|
|
|
Song Select (Yes/No)
|
No
|
No
|
|
|
Start (Yes/No)
Continue (Yes/No)
Stop (Yes/No)
|
Yes
No
Yes
|
Yes
Yes
Yes
|
Resets SEQUENCER, ARP, MOTION REC, MODULATION position to start after first MIDI clock event after start event
|
|
MIDI Time Code (Yes/No)
|
No
|
No
|
|
|
MIDI Machine Control (Yes/No)
|
No
|
No
|
|
|
MIDI Show Control (Yes/No)
If yes, MSC Level supported
|
No
|
No
|
|
|
3. Extensions Compatibility
|
|
|
|
|
General MIDI compatible?
Is GM default power-up mode?
|
No
|
No
|
|
|
DLS compatible?
|
No
|
No
|
|
|
Standard MIDI Files
|
No
|
No
|
|
|
XMF Files
|
No
|
No
|
|
|
SP-MIDI compatible?
|
No
|
No
|
|